HPI SAVAGE X-4.6 RtR met elektrische starter

art# naam € incl. BTW bestel
HPI105645 RTR SAVAGE X 4.6 W/ 2.4GHz & RED/GRAY TRUCK BODY € 515.00
[/Images/105645-175.jpg] 4.6cc MOTOR MET ELEKTROSTARTER EN AUTOMATISCHE 2 VERSNELLINGSBAK EN 2.4 GHz STUURWIELZENDER
[Plaatje]Ready to Run Savage-X, nu uitgevoerd met een super snelle 4.6cc 7 poorts motor met elektrisch startsysteem. Standaard voorzien van dubbele schijfremmen en metalen differentieel huizen en een automatische 2 versnellingsbak.
Deze SAVAGE X 4.6 is compleet met 2.4 GHz zender set en elektrische starter.
De Savage X is compleet gebouwd, met ingebouwde servo's en 2.4 GHz ontvanger, electro roto start systeem en gespoten body.
Niet inbegrepen: start benodigdheden, accu's voor de zender, ontvanger en roto starter, een lader voor de accu's, brandstof.
HPI106552 RTR SAVAGE X 4.6 W/ 2.4GHz & PINK/GRAY TRUCK BODY € 525.00
[/Images/106552-175.jpg] 4.6cc MOTOR MET ELEKTROSTARTER EN AUTOMATISCHE 2 VERSNELLINGSBAK EN 2.4 GHz STUURWIELZENDER
[Plaatje]Ready to Run Savage-X, nu uitgevoerd met een super snelle 4.6cc 7 poorts motor met elektrisch startsysteem. Standaard voorzien van dubbele schijfremmen en metalen differentieel huizen en een automatische 2 versnellingsbak.
Deze SAVAGE X 4.6 is compleet met 2.4 GHz zender set en elektrische starter.
De Savage X is compleet gebouwd, met ingebouwde servo's en 2.4 GHz ontvanger, electro roto start systeem en gespoten body.
Niet inbegrepen: start benodigdheden, accu's voor de zender, ontvanger en roto starter, een lader voor de accu's, brandstof.
.

HPI SAVAGE X-4.6 RtR met Electro starter

Vernieuwde versie van de beroemde HPI Savage X 4.6, nu met een 2.4 GHz besturing. Met een 2.4 GHz systeem, wacht je nooit meer op een bezet/vrij kanaal en kunnen er vele gebruikers actief zijn zonder elkaar te storen. Een 2.4 Ghz systeem is ook niet te storen met metaal op mataal contacten.
Deze 2.4 MHz technologie heeft een ingebouwd failsafe systeem, wat op alle kanalen werkt en in te stellen is. Je hoeft (mag zelfs niet) dus geen externe fail safe te monteren.

Verder is deze Savage uitgerust met een elektrisch startsysteem, dus geen geruk aan een touwtje: druk op de knop en starten maar.

Verder is deze versie nu voorzien van 4 stuks Big-Bore schokbrekers en een nieuw model body met vernieuwde kleuren



The New Savage X 4.6 - RTR Convenience With SS Power And Spec + More!

Featuring a wide range of improvements, a huge jump in power and several option parts now as standard, the Savage X 4.6 is going to set the new standard for big block monster trucks. HPI designers and engineers have continued to improve the Savage X, making the best even better! The bar has been raised again, once again showing why it's the most popular big block monster truck in the world!

Building on the solid foundation of the genre-defining Savage line of HPI monster trucks which includes the tremendous Savage X SS, the Savage X 4.6 RTR features a huge list of improvements that make the toughest, strongest, most resilient and most powerful RTR Savage ever!

The Savage monster trucks have always been about immense size, speed and durability.

The first thing people notice about the Savage X monster truck is its immense size. With its nearly 17 inch width, the Savage X can't help but impress! The massive tyres with chunky treads, big pick-up style bodyshell, and the flashy aggressive paint job all scream 'Watch out, I'm coming through'!

If there's one thing the Savage X can do without even running its engine, is scare away the competition!





New Option Parts Included As Standard!

Diff with alloy case Dual disk brake

Included with the Savage X 4.6 are two of our latest option parts: #86827 Alloy Diff Cases and new stronger brake disks!

The Alloy Diff Cases prevent damage to the internal diff gears front and rear, keeping the engine's horsepower where you want it - at the tyres!

Helping all the extra speed slow down are new red fibre brake disks, which are more fade-resistant than ever before and withstand the brutal punishment of the new F4.6 engine!




Savage X 4.6 Durability

'Proven Tough' Over-sized Suspension

Eight long coil-over shocks absorb anything type of rough terrain you throw the truck at, and beefy suspension arms and uprights can take the punishment of big-air drops and top speed runs over bumpy terrain. Keeping everything protected is the cool-looking anodized TVP chassis, which features a custom 'X' graphic. The enclosed radio box has been redesigned on the Savage X models as well, allowing you to add the HPI308 Battery Level Indicator and charging jack for the receiver battery.

The TVP (Twin Vertical Plate) chassis plates have been modified at both ends in increase the truck's durability. Structural webbing was added to the central gearbox to improve its strength. Extra material was added to the skid plates and bumper struts front and rear to let the Savage X SS 4.6 take on crashes and jumps. The engine mount and engine plate are now thicker to give you more durability and endurance, especially when you're landing massive jumps!


Savage X 4.6 Speed "
Get that Savage X 4.6 engine going, and once again anyone watching will be surprised at its speed! With enough power to pull long wheelies with ease, the new F4.6 powerplant is designed for one thing and one thing only - huge amounts of horsepower! Nearly 3hp, in fact! Enough horsepower to get the Savage X 4.6 up to 45mph (73kph)! You want speed? You've got it!



In one word, this new power plant makes the Savage X 4.6 - FAST! The F4.6 engine is a new HPI high-power unit with the proven HPI Nitro Star reliability, featuring 2.9hp from its .28 cubic inch displacement! A great-looking anodized solid aluminium cooling head looks the business and does a great job of keep the engine cool! Rough off-road terrain and extreme stunts are not a problem when this engine is on the case! The F4.6 features true ABC construction (Aluminium piston, Chrome-plated Brass sleeve), race-tuned 8 port tuning, an 7.5mm composite carburettor, heavy duty triple shoe clutch, plus a convenient Roto Start mechanism for easy starting. A dual-stage air filter protects the F4.6 from dust and dirt kicked up by the power 4WD action! So fast, in fact, that HPI designers made significant improvements to the chassis, gear cases and other parts of the truck to beef it up so it could handle the extra power! The F4.6 engine pumps out nearly 3 horsepower and sits on an improved engine mount and thicker engine plate to give you more durability and endurance, especially when you're landing massive jumps! Little changes with big effect!



Drivetrain

Our designers didn't ignore the drivetrain, either. We wanted to make sure the Savage X 4.6 drivetrain could handle the extra power of the Nitro Star F4.6! The stock Savage drivetrain already features a permanent 4WD system and spins on rubber-sealed ball bearings, plus it features an adjustable 2 speed transmission. To add extra strength to all this, our designers added loads of improvements and extra features. The 17T clutch bell has been modified so it engages the spur gear with extra consistency. A steel spacer is used in the clutch bell, which provides more durability than the brass spacer. The adjustable slipper clutch features a slipper pad made from a more durable material, so there's less maintenance and more driving! Also, aluminium alloy diff cases are now standard on the front and rear differentials, which feature the HPI 4-gear differential. Finally, to make sure you can stop this beast as quickly as you might need to, the Savage X 4.6 is equipped with a new twin vented disk brake made from a space-age heat-resistant fibre material to give you fantastic stopping power!


Go Where Buggies and Truggies Fear To Tread!

When normal 4WD can't cut it, when delicate racing parts fail, or when the terrain is simply too terrifying to race on, that's when the big-block 1/8 scale Savage X series of trucks is in its element! Engineered for the most brutal of environments and built for durability in the most extreme terrain, the Savage X 4.6 is the ultimate 'basher' monster truck!

Fat, chunky treads on each wheel grip any type of terrain, whether wet or dry, mud or tarmac. Full-time 4WD transmission pulls the truck over and through anything in its path. Eight long coil-over shocks absorb huge drops and help give extra traction on rough surfaces. Combine all this with the monster horsepower of the new 2.9hp F4.6 engine, and you get the roughest, readiest truck around!

With all this power and durability, the jumping ability of the Savage X 4.6 is totally unsurpassed by any other monster truck. With a top speed of over 70kph (43mph), hitting a ramp with something this size is something that absolutely must be seen to be believed! Backflips, forward flips, double backflips and more stunts are easy with this much power and control! Landing the truck is easy, too: big shocks absorb the landings and tough suspension parts take the abuse of jumping with ease.


Latest Improvements
Nitro Star F4.6 2.9hp 8-port rear-exhaust engine is derived from off-road racing engines & gives you enough horsepower to get over 45mph! Stronger TVP (Twin Vertical Plate) chassis for improved durability and strength at high speeds. 7075-series 2.5mm aluminium engine plate is thicker for more resistance to bending under stress. Dual-stage air filter to protect the engine from dirt and fine dust.
Adjustable dual disk fade-resistant brake set for incredible stopping power. Aluminium diff cases to prevent spreading of the internal gears. Optimised clutch bells engage spur gear better for more e cient power transfer. Steel clutch bell spacer replaces brass insert and works with ball bearings to give maximum transmission efficiency.
Increased webbing inside and out of central gearbox for greatly increased durability in the rough stuff. Stronger front and rear skidplates and bumpers resulting from additional material added in key areas. Adjustable slipper clutch equipped with a new, more durable slipper pad for greater life. Pre-trimmed & painted Nitro GT-2 bodyshell supplied in new paint scheme with decals pre-applied, lets you get going in style quick!
Main Features
Full-time shaft driven 4WD system for maximum grip, power and grunt! Wide-track suspension gives you smooth driving and great handling - nearly 17 inches (43cm) wide! Eight long-stroke oil-filled shock absorbers provide confidence over the jumps and on big-air landings. Adjustable 2-speed transmission set with hardened metal gears gives you great acceleration and top speed!
Massive 160cc fuel tank for long run times and huge amounts of bashing and racing fun. X-style clipless radio box protects the electronics from splashes, dirt and more. Lightweight suspension arms improve suspension action and give great response in corners and over bumps. Full set of rubber-sealed ball bearings for maximum efficiency and power from the engine.
Stiff racing springs for superb driving feel and best suspension action. Adjustable turnbuckles. Hardened 4-gear diff setup can handle the abuse of high-horsepower engines like the F4.6. Cam-type servo saver steering arms improve the efficiency and power of the steering servo. Radio box features openings for a battery charging jack and HPI308 illuminated Battery Level Indicator (not included).

 

The low centre of gravity chassis drops the engine, centre gearbox and radio 5mm lower than the Savage 25, resulting in better handling and faster lap times. Large 17mm metal alloy hex hubs hold the wheels securely and prevent the hex stripping in the wheels under heavy load applications. New lightweight GT-2 tyres with aggressive tread pattern for excellent all-terrain traction and long tyre lifetime. To add cool looks, the GT-2 tyres are mounted and pre-glued on Chrome Warlock wheels. Included is an optional nylon roll cage which will help protect your engine and heat sink. It can be mounted with almost every Savage bodyshell but requires additional cutting on your bodyshell. (pictured here on a Savage X RTR)



Easy access to the differential and centre transmission gears!

The Savage X series has been designed for quick and easy access to centre transmission gears as well as the front and rear gear diffs - for easy maintenance!

No chassis disassembly is required! Centre transmission housing can be opened from the top, front and rear diffs can be removed by taking off just one part.

 RTR - PERFORMANCE STRAIGHT FROM THE BOX

  HPI makes it as easy as possible for beginners to get into Nitro RC cars. The Savage X 4.6 RTR it is completely pre-built and ready to go right out of the box!

Everything is assembled and tuned for you by professionals - diffs, slipper clutch, shocks and more are perfect before you even open the kit and with all the top Savage X options already installed, you don't have to do a thing to get going fast!

HPI Ready-To-Run models bring you the same high performance and quality that you'd expect from a high end model car kit but with the added convenience of being factory pre-assembled to the highest standards - giving you a high performance RC car straight from the box!

HPI RTR cars are 98% factory assembled - they come Ready-To-Run and equipped with all the radio gear required. Just a few steps are needed to get your car up and running, such as adding the batteries to the transmitter and receiver and if you have a nitro powered car, running in the engine - which is now even easier with our comprehensive manual and HPI RC cars DVD which are both included in every box.
  Full Assembly Instructions and HPI RC Cars DVDAs with all HPI cars and trucks, you get a full, in depth instruction manual with step by step instructions that allow you to easily disassemble and reassemble your monster truck for maintenance and easy servicing.

The information on the HPI RC Cars DVD provides a complete and detailed introduction to the fascinating world of RC model cars. This DVD will show you step by step how to start and run in a Nitro engine, and how to get the best performance from your HPI RC car.

The HPI RC Car DVD is your personal RC car expert in a box!
  De nieuwe Savage X4.6 is uitgerust met een moderne 2.4 GHz besturingssysteem.

Met een 2.4 GHz systeem, wacht je nooit meer op een bezet/vrij kanaal en kunnen er theoretisch 72 gebruikers actief zijn zonder elkaar te storen.
Gewoon zender aanzetten, ontvanger inschakelen, 2 seconden wachten voor de automatische scan en rijden maar!
Een 2.4 Ghz systeem is ook niet te storen met metaal op mataal contacten.

De 2.4 MHz technologie heeft een ingebouwd failsafe systeem, wat op alle kanalen werkt en in te stellen is. Je hoeft (mag zelfs niet) dus geen externe fail safe te monteren.

De Savage met reverse module wordt geleverd met een motor met trekstarter, en heeft dus gn Rotostarter

Easy Starting The Savage X 4.6 RTR includes a Roto Start 2 starting system to get you up and running with minimal effort! To start your engine simply insert the Roto Start into the engine's back plate, press the trigger and away you go!

The Roto Start 2 features an engine save mechanism that protects the engine in case of engine fuel flooding. The protection mechanism acts like a fuse. In case of an overload caused by a flooded engine the fuse button will pop out and stop the Roto Start. After clearing the engine (as show on the RC Cars DVD) you simply push the fuse button back in and start the engine as normal.
Roto Start 2 - It's the easiest way to get started!

Roto Start 2 Starter System

Overload Protection Button




Comes with factory assembled chassis with pre-painted GT-2 bodyshell (red or blue), radio gear and F4.6 engine.
Also contains detailed instruction manual and HPI RC Cars DVD. Ready to bash straight from the box!

SAVAGE X 4.6 Ready To Run RIJKLAAR OPTIES

Hieronder vind je een opsomming met wat verschillende keuze mogelijkheden welke je nodig hebt om een Savage X 46 RtR verder rijklaar te maken.
Wat je wel of niet nodig hebt hangt af van wat je misschien al hebt of niet, en welke keuze je maakt hangt af van hoe goed je het wilt hebben of wat je budget toelaat.
Je kunt heel makkelijk zelf een begroting of offerte maken, door de artikelen van je keuze in het boodschappenwagentje te doen.
Deze bestellijst kun je dan uitprinten, en bepaalde artikelen verwijderen en vervangen door andere.
Zo kun je zien wat het totaal plaatje wordt voor verschillende sets

BENODIGDHEDEN OM DEZE AUTO HELEMAAL RIJKLAAR TE MAKEN:

Deze auto is nog niet gebruiksklaar, er zijn nog diverse zaken nodig om er mee te kunnen rijden, zoals een gloeiplug driver (nodig om te kunnen starten), brandstof en een vulfles, maar ook zijn er nog 8 AA penlites nodig voor in de zender en 4 AA penlites voor in de auto om de ontvanger en servo's van stroom te voorzien.
Wij bieden diverse sets aan om je auto gebruiksklaar te kunnen maken, welke bij aanschaf van een Nitro auto voor een speciale setprijs meegeleverd kunnen worden.
Wat je in ieder geval nodig hebt is een start set, bestaande uit een gloeiplug driver met accu en lader, een blik brandstof en een fles waarmee je de brandstof in de tank kunt doen.
Bovendien zijn er nog wat handige dingen aan te raden, zoals omschreven hieronder.
Afhankelijk van je wensen kun je b.v. uit n van de volgende sets kiezen, in de meest complete zitten ook de accu's en bijbehorend laadsysteem voor de ontvanger accu en de zender:
art# naam € incl. BTW bestel
SETNIPK PK NITRO START SET COMPLETE , BIJ AUTO € 55.00
[/Images/setni1-200.jpg] [info] PK NITRO START SET COMPLEET, speciale prijs alleen geldig bij aanschaf van een auto
Deze uitgebreide start set bevat op de zender set en de stroom voorziening voor zender en ontvanger na, vrijwel alles wat je nodig hebt om te kunnen rijden met een Nitro auto. De set bevat
  • een gloeiplug starter met aluminium huis en een verwisselbare 3000 NiMh accu
  • bijbehorende lader met 4 uitgangen, waarmee de gloeiplugdriver alsmede de zender en de ontvanger accu (beide laatste niet inbegrepen) geladen kunnen worden.
  • Verder bevat de set nog een gloeiplug sleutel die de gloeiplug vasthoudt
  • een reserve gloeiplug,
  • een literblik brandstof,
  • een brandstof vulfles,
  • een tube schroeven borgmiddel (loctite),
  • een flesje luchtfilterolie
  • en een uitgebreid PK instructie boek waarin allerlei tips en trucs staan die normaal niet in een instructie boekje staan.
  • Deze speciale set prijs is alleen geldig bij aanschaf van een auto.
  • Klik op het plaatje voor uitgebreide uitleg over deze set.
art# naam € incl. BTW bestel
SETNIPKAC5 PK NITRO START SET COMPLETE , INCL TX & 6Volt RX BATTERIES AND CHARGER € 89.95
[/Images/setni3-200.jpg] [info] PK NITRO STARTSET voor zwaardere nitro auto's, inclusief ZENDER ACCU'S, 5 CELLEN 6 VOLT ONTVANGER ACCU & LADER. Speciale prijs alleen geldig bij aanschaf van een auto.
[Plaatje]Deze uitgebreide start set bevat op de zender set na, vrijwel alles wat je nodig hebt om te kunnen rijden met een Nitro auto.
De set bevat
  • 8 stuks 2000 NiMh penlite accu's voor in de zender
  • een 5 cellen, 6 Volt NiMh accu voor de ontvanger. Deze 5 cellen ontvanger accu zorgt ervoor dat de servo's 25% meer trekkracht en 25 % sneller zijn dan wanneer ze met een normale 4 cellen (4.8V) ontvanger pack gebruikt worden. Dit is zeker bij zwaardere 1/8 auto's een noodzaak om de servo's goed hun werk te kunnen laten doen, maar ook een 1/10 auto reageert sneller met zo'n ontvanger accu.
  • een aluminium gloeiplug starter met verwisselbare 3000 NiMh accu,
  • een lader waarmee de gloeiplug driver alsmede de zender en ontvanger accu's geladen kunnen worden.
  • Verder bevat deze set nog een gloeiplug sleutel die de gloeiplug vasthoudt,
  • een reserve gloeiplug,
  • een literblik brandstof,
  • een brandstof vulfles,
  • een tube schroeven borgmiddel (loctite)
  • een flesje luchtfilterolie
  • een zeer uitgebreid PK instructie boek waarin allerlei tips en trucs staan die normaal niet in een instructie boekje staan.
  • Klik op het linker plaatje voor uitgebreide uitleg over deze set.
.
Bij de Savage met Roto Start Systeem (electrisch startend) wordt wel de complete start unit meegeleverd, maar niet de benodigde accu en lader hiervoor. (bij de Savage 21 heb je deze dus niet nodig).Voor het elektrische RotoStart systeem, heb je ook nog een 7.2V accu en een lader daarvoor nodig om het start systeem van stroom te voorzien. Bij de uitgebreide PK startset zit een multi lader die ook de accu van een rotostart systeem op kan laden. Als je die set neemt, hoef je dus geen aparte lader voor de start accu te kopen. Bij de basis startset zit alleen een lader voor de gloeiplug driver, bij die set heb je dus wel een extra lader voor de roto starter nodig.
art# naam € incl. BTW bestel
art# naam € incl. BTW bestel
PT256 MULTICHARGER 3 € 18.95
[/Images/ca606033.jpg] ALLES IN 1 LADER VOOR ZENDER - ONTVANGER EN GLOEIPLUGDRIVER
Met deze lader kun je vrijwel alle accu's die je voor een nitro auto nodig hebt apart of tegelijk laden. Er zitten 3 uitgangen op: 1 voor zenders (mits de zender is voorzien van een laadplug), 1 voor een ontvanger accu en 1 voor een gloeiplug driver. Het wel of niet laden van de accu wordt per uitgang aangeven door een rode LED. De laadstroom per uitgang is zo gekozen, dat overladen vrijwel niet mogelijk is. De zender en ontvanger uitgangen laden met max. 200 mA (d.w.z. dat een 2000 accu in ongeveer 14 uur vol zit, de gloeiplug uitgang laadt met 300 mA (een accu van 3000 mAh zit dus in 14 uur vol). Dit lijkt lang, maar hierdoor is overladen niet mogelijk, en gaan je accu's veel langer mee, ook al zou je ze een week laten zitten,. Alle uitgangen zijn van vrijwel universele stekkers voorzien, voor de zender zitten er 2 soorten bij welke verwisselbaar zijn, afhankelijk van het merk zender. De ontvanger uitgang is van een kleine rode 2 polige stekker voorzien, als je een 3 polige ontvanger accu stekker hebt, kun je zijkant van de stekker open snijden zodat ook die stekker er in past, en de gloeiplug driver uitgang is van de gebruikelijke contra stekker voorzien waar je de gloeiplugdriver zo op kunt klikken.
.
De ontvanger en de ontvanger accu zijn netjes weggeborgen in een afgesloten box. Om de ontvanger accu op te laden, moet je dan de box openmaken, de ontvanger en de accu er uit halen, de stekkers uit de ontvanger trekken, en die aansluiten op de lader. Na het laden, moet je alles weer aansluiten en in de box wegwerken, en de box weer afsluiten. makkelijker is om de volgende schakelaar met laad-aansluiting er bij te nemen, dan hoef je niets anders te doen dan de lader op de laadaansluiting van de schakelaar aan te sluiten en na het laden weer los te nemen.
art# naam € incl. BTW bestel
PT45 Receiver switch with separate charge connector € 7.50
[/Images/schakelaar3draads.jpg]
aan/uit schakelaar voor een nitro auto, met extra laadplug aansluiting waar je direct de lader op aan kunt sluiten zonder iets los te halen. Speciaal handig voor auto's waarbij de ontvanger en accu in een radio box opgeborgen is. Deze versie is van stekkers voorzien welke op alle zender/ontvanger systemen passen
.
Er is wel een klein probleempje wat laden betreft: bij de startset zit wel een lader waarmee o.a. ook vrijwel alle merken zenders opgeladen kunnen worden, maar de standaard HPI zender heeft geen aansluiting voor een lader. Deze kun je er wel vrij makkelijk inbouwen als je kunt solderen ( of iemand kent die dat kan)
Wil of kun je dat niet, dan kun je ook de losse penlite lader nemen. daarmee kun je 4 penlites voor de zender tegelijk laden ( je moet er 8 doen, dus het gaat wel in twee sessies)
art# naam € incl. BTW bestel
PK100321 Inbouw laad aansluiting voor zenders € 4.95
[/Images/laadplugset.jpg]
[Plaatje]Laadplug aansluiting om in te bouwen in een zender, zodat de accu's geladen kunnen worden zonder ze uit de zender te nemen. De meeste zenders zijn al voorzien van zo'n aansluiting, maar sommige standaard zenders nog niet.
Dit soort zenders zijn vrij probleemloos open te maken, er zit niets ingewikkelds in.
Vaak zit de mogelijkheid om zo'n aansluiting te monteren er al wel in, anders moet je op een geschikte plaats even een gaatje maken waar de connector in gemonteerd kan worden.
  • Met inbouw instructie's en beveiligings diode, je moet wel kunnen solderen.
  • Deze aansluiting maakt gebruik van dezelfde stekker als de zenders van bv. Futaba, Hitec, Ko, Accoms etc.
  • Bijpassende laadkabel met bananenstekkers is de PKL201.
art# naam € incl. BTW bestel
.
bestuurbare benzine auto rc auto benzine bestuurbare brandstof auto rc auto modelbouw rc auto speelgoed rc auto brandstof
radiografische benzine auto rc auto motor radiografische bestuurbare auto modelbouw benzine auto nikko auto's .

Binnen Nederland: 3.50 euro verzendkosten op bestellingen tot 50.00 euro, boven 50.00 euro GEEN verzendkosten. Voor Belgie: 7.50 euro verzendkosten.