PK Model Racing is vanaf 1 November GESLOTEN  klik hier voor meer info 



Geen artikelen gevonden voor: quadkopter_blade MACH25*



Blade MACH 25 quadcopter

Blade Mach 25 quadcopter met carbon chassis Blade MACH 25 quadcopter detail chassis
Dit is het hart van de Mach 25 met netjes weggewerkt de 4 in 1 snelheids regelaar en alle andere elektronica


Blade MACH 25 quadcopter chassis
Detail opname van het koolstof chassis. Het chassis is een double deck constructie, dus met een onder en boven deel, beide van Koolstof
Blade MACH 25 quadcopter aluminium arm steun
De armen zijn opgehangen in fraaie aluminium steunen met een klemsysteem voor de armen, de hoek van de motoren kan ingesteld worden door de armen te verdraaien
Blade MACH 25 quadcopter motorophanging
de motoren staan in voorwaartse richting gekanteld, voor meer voorwaartse snelheid bij een minder grote hoek van de body
Blade MACH 25 quadcopter motor
Fraaie aluminium motorsteun met daarin opgehangen de sterke 2200KV outrunner brushless motor
Blade MACH 25 quadcopter accu
De Mach 25 wordt geleverd compleet met een 11.1V 1350 mAh lipo accu.
een lader hiervoor zit er standaard niet bij.

An Immersive RC Flight Experience Focused on Performance

The Blade® Mach 25™ multirotor makes getting into 250-class quad-racing easy. Thick carbon-fiber plate construction with robust aluminum support makes this fully assembled racer lightweight and incredibly durable. In the event of a mishap, replacement of the self-tightening propellers is all you’ll likely need. Brilliant LED lighting helps with orientation and identification in the heat of a race. Powerful motors that are canted forward help give you the performance edge while the protected ultra micro FPV camera is soft mounted for the best view. The streamlined body combines improved aerodynamics with an additional level of protection that makes your Mach 25 machine stand out from the pack.

Exclusive SAFE® (Sensor Assisted Flight Envelope) technology built into the Spektrum AR636QR receiver is a revolutionary electronic flight envelope protection system that makes it easy to stay in control. Multiple flight modes with increasing levels of agility are provided and just a transmitter switch away. From maximum assistance with self-leveling and envelope limitations to full-range aerobatic agility, SAFE technology gives you the ability to get up to speed at your own pace.

Bind-N-Fly® Completion

Now it’s possible to start enjoying high-performance racing virtually the moment you open the box. Just charge the battery, bind the model to your DSMX® technology compatible transmitter and fly.

FPV Ready

The installed Spektrum™ ultra micro, 25mW airborne FPV camera system is mounted to a damped carbon-fiber plate and features excellent range for approved AMA line-of-sight FPV flying. All you need to enjoy the view is a Fat Shark compatible headset or 5.8GHz video monitor.

Carbon-Fiber Frame

Durable, 2.0mm thick, carbon-fiber frame plates surround vital electronics and connect with tough CNC-machined aluminum supports that hold the aluminum motor booms.

Canted Motor Mounts

For quicker acceleration and faster forward flight the four brushless motors are mounted at a forward angle. Its lower flight angle also improves your visibility through the camera.

Self-Tightening Propellers

No tools are required to change out broken props. The self-tightening hubs make changing props quick so that you can get back to racing quicker. The other benefit of the hub design is that it makes the cost of propeller replacement much lower.

Integrated LED Lighting

Brilliant LED lighting in each motor boom helps with your visual orientation and makes it possible to locate your opponent more quickly.

Streamlined Body

To improve aerodynamics and add a level of protection against the elements is a durable body that’s been custom designed by Mirco Pecorari of Aircraft Studio Design.



rotor diameter 135mm
accu 11.1v 3S lipo 1350 mAh
lader Niet inbegrepen
Motoren outrunner, brushless, 2200KV
regelaar 4 in 1, Castle Creations
lengte mm
breedte mm
camera 25 mW ultra micro FPV
ontvanger Spektrum AR636QR DSMX met druk sensor.
Safe stabilisatie
zender niet inbegrepen.
benodigd: 5 kanaals Spektrum DSMX of DSM2